Authors: Stuart E. Rogers
smosurf [-f infile] [-o outfile] [-nztarg n]
[-jbeg jb] [-jend je]
[-kbeg kb] [-kend ke]
[-lbeg lb] [-lend le]
[-jklline jkl] [-relax r]
-f infile: The input grid file, a PLOT3D unformatted single or multi-zone grid file. Redistribution will be done on only one zone, denoted by nztarg. -o outfile: The output grid file containing the new grid. This will be written as a PLOT3D unformatted single or multi-zone grid file. -nztarg n: The zone number of the zone in infile which will be used for the redistribution. Default: n=1. -jbeg jb -jend je -kbeg kb -kend ke -lbeg lb -lend le: Denotes subset of grid-lines to be smoothed. Negative indices are allowed, for example: if je<0, then je=jmax+1+je. Default: jb=kb=lb=1, je=ke=le=-1. -jklline jkl: jkl=1,2, or 3. Denotes the family of grid lines along which the redistribution will take place. Default: jkl=2. -relax r: relaxation factor that determines the rate of increase of allowed movement for points increasingly further away from the subset boundary. Allowable values: 0 < r <= 1.0 Default: 0.1
NASA Ames Research Center, Moffett Field CA 94035-1000, (650) 604-5000
Privacy Statement
URL: http://rotorcraft.arc.nasa.gov/
This Website Maintained By: Randall L. Peterson.
Responsible NASA Official: Dr. William Warmbrodt (Chief)
Ames Research Center Homepage
NASA Homepage